How to Avoid a Treasury Packet Rejection When Cashing Estate Savings Bonds
The Short Answer
If you are an executor filing FS Form 1522 or FS Form 1455 to cash or distribute a deceased owner's paper savings bonds, the single most important thing you can do is submit a complete packet on the first attempt. Treasury currently lists five months or longer for authorized paper-bond transactions not in the requester's name. A rejection puts you back at the end of that queue — not at the front. The five failure points that cause most rejections are all preventable with a pre-submission checklist.
Why Packet Rejections Hurt More Than They Should
A rejected packet is not like a bounced check that gets reprocessed in a few days. Treasury processes paper bond requests by mail, in order of receipt. When your packet comes back with a deficiency notice, you fix the problem and mail it again — and it enters the queue as a new submission. Five months becomes ten. If your probate court expects a final accounting within 12–18 months, a single rejection can force you to ask the court for an extension.
Forum reports confirm the scale of the problem. Users on r/Bogleheads report wait times of 9–12 months even for straightforward requests. Add a rejection cycle and you are looking at well over a year for bonds that should have been a routine administrative task.
The Five Most Common Rejection Reasons
1. Court Letters Older Than One Year
Treasury requires certified court appointment documents (Letters Testamentary or Letters of Administration) dated not more than one year before the date you submit the packet (31 CFR 353.71(a)(2)). If more than one year has passed since issue, provide an updated copy with a legible seal or stamp showing the letters remain in full force and have not been revoked.
How to prevent it: Check the date on your court letters before preparing any Treasury forms. If more than one year has passed, provide an updated copy with a legible seal or stamp showing that the letters remain in full force and have not been revoked.
2. Wrong Signature Certification Type
This is the rejection that frustrates executors the most, because it feels arbitrary. Treasury has specific rules about who can certify your signature on each form:
- FS Form 1522 (payment): if the total current redemption value is more than $1,000, the signature must be certified by a notary public or an authorized certifying officer at a financial institution. At $1,000 or less, a current copy of your driver's license, passport, state ID, or military ID is sufficient.
- FS Form 1455 (distribution to heirs): notary certification is not accepted. The signature must be certified by an authorized officer at a commercial bank, trust company, credit union, or broker-dealer — typically through a Medallion Signature Guarantee or an institutional paying agent stamp.
The difference matters. An executor who gets a notary stamp on FS Form 1455 will have the packet returned. The right certification for FS Form 1455 is an authorized certifying officer's seal or stamp from a financial institution; Treasury does not accept notary certification for this form.
3. Direct-Deposit Information Errors
Since the federal government has targeted phasing out paper check disbursements, Treasury deposits bond redemption proceeds electronically into the estate bank account. The form asks for the account name, routing number, and account number. Three things go wrong regularly:
- The account name does not match the legal payee. Treasury expects the estate's formal name (e.g., "Estate of John A. Smith, Deceased, Jane Doe Executor"). A personal checking account in the executor's name will be rejected.
- Routing or account numbers are transposed. Treasury does not call to verify — it returns the packet.
- The bank's internal name for the account does not match what the executor wrote. Some banks abbreviate estate account titles differently from how the court order reads.
How to prevent it: Get a voided check or a letter from the bank confirming the exact account title, routing number, and account number. Compare every digit against what you write on FS Form 1522 before mailing.
4. Incomplete Bond Listings
FS Form 1522 has limited space for listing bonds. If the estate holds more than a handful, you need FS Form 3500 (Continuation Sheet for Listing Securities) or a plain-paper attachment in the same format. FS Form 1522 asks you to list each bond's issue date and serial number.
Executors who list some bonds but not all — planning to submit the rest later — sometimes find that Treasury processes only the listed bonds and treats the submission as complete. The unlisted bonds then require a separate submission with a new processing cycle.
How to prevent it: List every bond you intend to redeem in a single submission. Use FS Form 3500 for overflow. A bond inventory log that tracks serial numbers, series, face values, and redemption values makes this straightforward.
5. Missing Death Certificate or Co-Executor Signatures
Treasury's administered-estate instructions require certified death certificates when more than one person is named on the bonds; a separate certificate for the last-deceased owner is not required if that person's date of death appears in the letters of appointment. Under FS Form 1455, all fiduciaries must join unless an express statute, court decree, or the terms of the governing instrument allow one or more to execute the request. A packet signed by only one co-executor when the letters say "joint authority" comes back.
How to prevent it: Include the required certified death certificate copies; a photocopy is acceptable if the certification stamp or seal is legible. If you have a co-executor, check the certification requirements for each form; FS Form 1455 requires each required signer to appear before an authorized certifying officer, while FS Form 1522's certification depends on the bonds' current redemption value.
Free Download
Get the Executor's Savings Bonds Checklist — FS Form 1522 and 1455
Everything in this article as a printable checklist — plus action plans and reference guides you can start using today.
The Pre-Submission Checklist Approach
The pattern across all five failure points is the same: the executor did not know what Treasury specifically requires until the packet came back rejected. Treasury's official pages list the requirements, but they are spread across multiple sections with no single submission checklist.
The Executor's Savings Bonds Guide includes a submission packet checklist that covers every document, every certification type, and every field Treasury checks — organized in the order you assemble the packet. The goal is to give you one pass through the checklist before you seal the envelope, catching every deficiency that would otherwise cost five months.
Who This Is For
- Executors and administrators about to mail their first Treasury bond packet
- Personal representatives whose first packet was already rejected and who want to get the resubmission right
- Family members helping an executor assemble the paperwork and wanting to double-check completeness
Who This Is NOT For
- Surviving co-owners or named beneficiaries filing their own claims (different forms, different rules)
- Executors using the non-administered voluntary-representative route (FS Form 5336), which is limited to $100,000 or less in Treasury securities and related payments and does not apply when a court or state-law small-estate process is involved
- Anyone dealing with TreasuryDirect online accounts rather than paper certificates
Frequently Asked Questions
What do I do if my packet was already rejected?
Read the deficiency notice carefully — Treasury tells you exactly what was missing or incorrect. Fix only the stated problem, re-certify your signature if the notice requires it, and confirm your court letters are still within the one-year window before resubmitting. Do not assume the rest of the packet was fine; use a checklist to verify everything before mailing again.
Can I call Treasury to check my packet before mailing it?
Treasury's contact center (1-844-284-2676) can answer general procedural questions, but representatives cannot review a submission packet over the phone. The only way to know whether your packet is complete is to verify it against the specific requirements for your form and situation before mailing.
How long does it take to get a rejected packet back?
Treasury does not publish a specific timeline for returning rejected submissions. Forum reports suggest deficiency notices arrive 2–6 months after the original submission, meaning you may not know about a problem until months have passed. This is why first-attempt completeness is critical.
Does certified mail help prevent rejections?
Certified mail with return receipt provides proof of mailing and delivery or attempted delivery — it does not prevent content-based rejections. It can help confirm whether the packet was delivered. The cost of certified mail is trivial compared to the cost of a lost submission.
Get Your Free Executor's Savings Bonds Checklist — FS Form 1522 and 1455
Download the Executor's Savings Bonds Checklist — FS Form 1522 and 1455 — a printable guide with checklists, scripts, and action plans you can start using today.